BMP180 Digital Barometric Sensor Module
- Islamabad, Pakistan
This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, and pull-up resistors on the I2C pins. The BMP180 is the next-generation of sensors from Bosch, and replaces the BMP085. The good news is that it is completely identical to the BMP085 in terms of firmware/software/interfacing – you can use any example code/libraries for BMP085 as a drop-in replacement.
Vin: 2.0 to 5VDC
Logic: 1.8V / 3.3V compliant
Pressure sensing range: 300-1100 hPa (9000m to -500m above sea level)
Up to 0.03hPa / 0.25m resolution
-40 to +85°C operational range, +-2°C temperature accuracy
This board/chip uses I2C 7-bit address 0x77.
Arduino BMP180 library
Arduino Interfacing Example
1 x BMP180 Digital Barometric Sensor Module
When you call, don't forget to mention that you found this ad on DealMarkaz.pk
You must log in or register a new account in order to contact the publisher.