Arduino TB6612FNG Dual Motor Driver
- Islamabad, Pakistan
The TB6612FNG Motor Driver can Control up to TWO DC motors at a constant current of 1.2A (3.2A Peak). Two input Signals (IN1 and IN2) can be Used to Control Motor in one of the four function Modes - CW,CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the Motor out of standby mode.
Logic Voltage supply (VCC) can be in the range of 2.7-5.5VDC, while the Motor supply (VM) is Limited to a maximum Voltage of 15VDC. The current output is rated up to 1.2A per Channel (or up to 3.2A for a Short, SINGLE Pulse). Decoupling Capacitors are included on both supply Lines.
Power supply voltage: VM = 15 V(Max).
Output current: IOUT=1.2 A(ave) / 3.2 A (peak).
Output low ON resistor: 0.5Ω (VM ≥ 5 V).
Built-in thermal shutdown circuit and low voltage detecting circuit.
Thermal Shutdown Circuit.
Heat Radiation Design.
1 X Arduino TB6612FNG Dual Motor Driver
When you call, don't forget to mention that you found this ad on DealMarkaz.pk
You must log in or register a new account in order to contact the publisher.
Raspberry Pi 2 Model B Broadcom BCM2836 with 1GB Ram
The latest addition to the Raspberry Pi family, the Raspberry Pi 2 takes the platform to a completel...Rs. 4,500Other Electronics Islamabad 2 months ago