ADXL345 Digital 3-axis Acceleration, Gravity, Tilt sensor module – GY-291
- Islamabad, Pakistan
The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.
The ADXL345 is well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock. Its high resolution (4 mg/LSB) enables measurement of inclination changes less than 1.0°.
Tap/Double Tap Detection
Impact or colision Detection
Material: PCB + brass
Features Chipset: ADXL345;
Power supply :3~5V (Module has on-board 3.3V regulator)
IO Level : 3.3v (requires Level translator if interfaced with 5V IO)
Communication methods: IIC/SPI communication protocol;
Measuring range: +/- 2g +/-16g; 3-Axis, +/- 2g; +/-4g; +/-8g; +/- 16g
Applications: Flying robots, Stability control applications
Dimensions: 21 x 16 x 4 mm / 0.83 x 0.63 x 0.16 inch
Weight: 1 g / 0.04 oz
TI Device Support page
ADXL345 Triple Axis Accelerometer Arduino Library with extensive functions
Gesture Recognition Library
Adafruit ADXL345 library offers basic sensor test functions
You will also need the Arduino Sensor Library if you do not already have it installed.
1 x ADXL345 Digital 3-axis Acceleration, Gravity, Tilt sensor module – GY-291
When you call, don't forget to mention that you found this ad on DealMarkaz.pk
You must log in or register a new account in order to contact the publisher.